Product: M-LINER Aço Corten
Dimensions: 1,00x3,00 m
Average Thickness: 1-2 mm
Material: Microcrete Microtopping applied on special fabrics
Yield: 3 m2
M-LINER APPLICATION GLUE:
• M-LINER Glue - Application over carton plaster, wood or screed.<p>
• M-LINER Tile Glue Kit - Application over tile/cermaic walls.<p>
TOOLS USED TO APPLY M-LINER:
• M-LINER Spatule - M-LINER application on carton plaster, wood or screed.<p>
• M-LINER Grout Flout - M-LINER application on tile/ceramic walls.<p>
• M-LINER Trowel - M-LINER Tile Glue Kit applications.<p>
• M-LINER Brush Roller - M-LINER Glue application.
M-LINER - APPLICATION MANUAL ON PLASTERBOARD, WOOD OR SCREED
1st Step: Apply M-LINER Glue (ready to use product) using a brush roll or a brush on the surface where M-LINER will be applied..
2nd Step: Remove the back transparent film from the M-LINER sheet before applying it on the surface.
3rd Step: Apply the M-LINER sheet over the surface containing the M-LINER Glue with the help of a M-LINER Spatule.
4th Step: Cut the M-LINER excess using a craft knife and a metal ruler.
5th Step: Clean the M-LINER sheet using a wet cloth to remove any remaining glue.
6th Step: Let it dry for about 3 hours. Well done.
M-LINER - APPLICATION MANUAL ON TILE WALLS
1st Step: Open the M-LINER Tile Glue Kit and blend the M-LINER Base with the M-LINER Resin using a mixer, according to the instructions on the packaging label.
2nd Step: Apply a 1st coat of M-LINER Tile Glue Kit over the tile/ceramic walls using a M-LINER Grout Float. Let it dry for about 8 hours.
3rd Step: Sand the entire surface using a G. 80 or G. 120 sandpaper and then clean or vacuum.
4th Step: Apply a 2nd coat of M-LINER Tile Glue Kit over the tile/ceramic walls using a M-LINER Grout Float. Do not allow it to dry.
5th Step: Remove the back transparent film from the M-LINER sheet.
6th Step: Apply the M-LINER sheet over the fresh surface that was covered with the 2nd coat of M-LINER Tile Glue Kit with the help of a M-LINER Grout Float and a sponge.
7th Step: Cut the M-LINER excess using a craft knife and a metal ruler.
8th Step: Clean the M-LINER sheet using a wet cloth to remove any remaining glue.
9th Step: Let it dry for about 4 hours. Well done.
The examples presented are merely for illustration purposes, the actual result can be different due to the manual manufacturing method and print.